P&S Innovation

The X-gateway allows you to seamlessly inter- connect PLC control systems and their connected devices } The data transmission between the two networks is completely transparent. } Over 300 different network combination (Master, slave, Adapter, I/O device, Server) } Connects different PLC system (Siemens, Rockwell, Schneider, Mitsubishi, Omron, Beckhoff ) } Max 512Bytes Of Input and 512 bytes of output data } I/O data transfer with average through put between network of 10-15 ms } Configuration via USB using the included Anybus Configuration Manager-No programming required } IT functions such as dynamic WEB Server, supporting downloadable customer specific web pages. } Fast, dynamic transfer of Fieldbus data to e.g. SCADA/HMI / Enterprise level systems based on Microsoft Windows, via the included Anybus OPC server } Robust stand-alone housing for use in harsh industrial environments } Remote monitoring and diagnostic feature for most Ethernet version Via an Integrated WEB Sever } Anybus Master Configuration tool included free of charge with a Profibus, Device Net or Ethernet/IP Master/Scanner.

The terminal is designed for use within an Inline station. It can be used to integrate a lower-level PROFIBUS system into the Inline station and therefore into the bus system used. Within the Inline station, the terminal acts as a PROFIBUS master for the lower-level PROFIBUS system or as a PROFIBUS slave for a higher-level PROFIBUS system. As a PROFIBUS master, the terminal can be used to integrate standard-compliant PROFIBUS slaves into all INTERBUS or PROFINET-based controllers from Phoenix Contact. As a PROFIBUS slave, the terminal can be used to integrate a Phoenix Contact controller into any PROFIBUS-based systems (gateway). PROFIBUS features - PROFIBUS master/slave - Transmission speed: 12 Mbps, maximum - Diagnostic and error messages are exchanged Local bus features - 500 kbps and 2 Mbps transmission speed (automatic detection) - Maximum data width: 32 words General features - Serial interface with inserted memory stick for storing the configuration data - DIP switch for setting the data width - Direct PROFIBUS configuration in PC Worx - Integration of process variables using the connection editor - Integration of third-party devices using GSD

Additional Information:

• Item Code: 2700630

Inline communication terminal, for serial data transmission, complete with accessories (connector connector and labeling field), 1 serial input and output channel in RS-485/422 or RS-232 design

Additional Information:

• Item Code: 2700893

Inline, Temperature measurement terminal, Analog RTD inputs: 2, connection technology: 2-, 3-, 4-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field

The terminal is designed for use within an Inline station. It is used to acquire signals from resistive temperature sensors. The terminal supports all common platinum and nickel sensors according to DIN EN 60751 and SAMA. Cu10, Cu50, and Cu53 sensors as well as KTY81 and KTY84 sensors are also supported. The measuring temperature is represented by 16-bit values in two process data words (one word per channel).

Additional Information:

• Item Code: 2861328

Inline analog strain gauge input terminal, complete with accessories (connector and marking field), 2 fast inputs, 4-, 6-conductor connection technology

The terminal is designed for use within an Inline station. This terminal is a fast input module used to connect load cells, force transducers, mass pressure transducers, and similar devices based on strain gauges. The strain gauges can be connected using 6- or 4-conductor technology. The strain gauge output signals are measured in each bus cycle and updated in the process data (bus-synchronous process data update). The terminal is suitable for control applications with increased speed requirements. There are two options for data exchange: - via process data (both inputs in one bus cycle) - via PCP Compact (both inputs in the “Analog Values” PCP object)The measured values are represented by standardized 16-bit values. The measured values are represented by standardized 16-bit values.

Additional Information:

• Item Code: 2878638

Inline, Temperature measurement terminal, Analog UTH inputs: 2 (Thermocouples or linear voltage), connection technology: 2-conductor, transmission speed in the local bus: 500 kbps, degree of protection: IP20, including Inline connector and labeling field